Refrigeration is one of the most essential industries in the world: it is the
very basis of our food supply due to the importance of the cold chain, it is
also the basis of the production processes of countless sensitive and
life-saving products, such as medicines, vaccines and other pharmaceutical
products. Refrigeration is also at the center of major concerns: large-scale
food security, as well as the preservation of our environment.
Manufacturers and operators of refrigerators and freezers therefore face
increasing demands on operational safety and environmental protection.
The pressure, temperature, superheating and subcooling of a refrigeration
system must be regularly monitored to ensure its proper operation, safety
and efficiency.
The numerous international standards and regulations relating to the sealing
of cooling systems are constantly evolving. Since the most used refrigerants
are greenhouse gases with high global warming potential (commonly known
as GWP), regulations are increasingly strict. This is why each element of the
cold chain must be frequently tested: production facilities, refrigeration
facilities, freezers, refrigerators, refrigeration units, etc.
The two most important parameters for the
maintenance of cooling systems are temperature
and pressure, since they are the key to verifying
the correct functioning of the cooling process.
The advent of digital technology means great
improvements in quality when it comes to
adjusting cooling systems or heat pumps. Digital
manifolds provide high precision temperature and
pressure measurements, determine subcooling
and superheating, but also help with reliable
system evacuation with precise vacuum
measurement
Data recording is essential for monitoring the
operation of a cooling system over a long period
of time and the temperature behavior in a cold
store. It is therefore the main tool to ensure that
the cold chain has not been broken during storage and transport
Recording temperature and humidity data within
a refrigeration or freezing zone makes it possible
to certify that the cold chain has been maintained
throughout its most sensitive stages, mainly the
transport of temperature-sensitive goods such as
vaccines.
Given the significant health risks linked to the
breakdown of the cold chain, data loggers enable
the food and pharmaceutical industries to ensure
compliance with the strict quality requirements
defined by international standards
Refrigeration systems can suffer from more or
less significant refrigerant gas leaks. Additionally,
most refrigerants
are potent greenhouse gases and can seriously
harm the environment. For this reason, it is
extremely important to be able to easily locate any
leaks in order to quickly repair the damaged
section of the gas circuit. Searching for and
finding gas leaks can be very difficult. Fast
professional leak detectors are essential for
precisely locating the smallest leaks in a
refrigerant gas circuit.

KIMO SAUERMANN 의 Si-RM13은 아날로그 매니폴드의 견고함과 디지털 스마트 무선 온도&압력 프로브 기능을 가집니다. 이 패키지는 플렉시블 튜브의 2채널 아날로그 매니폴드 본체 (By-Pass 형식)와 아노다이징 (양극산화) 알루미늄 블록으로 구성됩니다.(테블릿 미포함)
Read More
KIMO SAUERMANN의 무선 매니폴드 프로브 Si-RM3 입니다. 고압 측과 저압측의 압력을 정확히 측정하는 압력프로브와 실시간 과열/과냉각 시간을 동시에 정확하게 계산하는 온도프로브로 구성됩니다. Si-Manifold 소프트웨어로 최대 126가지의 냉매에 대한 응축/증발 온도를 표시합니다.(테블릿 미포함)
Read More
KIMO SAUERMANN의 SI-RV3은 매니폴드 진공 프로브 입니다. 정확도 높은 측정으로 냉장 시스템 및 히트펌프의 빠르고 안전한 진공을 지원합니다.(테블릿 미포함)
Read More
KIMO의 TK 61/62 써모커플 디지털 온도계입니다. 다양한 열전대를 사용하여 공기 온도를 정확하게 측정하도록 설계되었습니다. 프로브는 포함되지 않으며 별도 판매됩니다.
Read More
KIMO의 적외선 온도계 KIRAY100 입니다. 측정범위 -50 ~ +800 °C 입니다. 듀얼 레이저 조준기가 장착되어 “비접촉" 기술을 사용하는 장점과 함께 모든 온도를 진단, 검사 및 확인하는 핵심 장비입니다. 적외선 온도계는 위험하거나 접근하기 어려운 뜨거운 물체의 표면 온도를 측정합니다.
Read More
Sauermann의 Si-RD3 냉매가스 누출 감지기는 모든 HCFC 및 HFC냉매, R1234yf, R1234ze, R290, R600a 및 5% 수소-95% 질소 혼합물(Nidron 5 및 Trace-A가스)을 포함하여 일반적인 냉매가스의 누출을 높은 감도로 감지합니다.
Read More
데이터에 빠르게 접근해야 하지만 로거를 위치에서 제거하고 싶지 않으신가요? KT 320 다기능 데이터 로거는 Kistock Mobile 앱을 통한 무선 연결을 사용하여 로거와 스마트폰 또는 태블릿을 연결할 수 있습니다. 또한 최대 5개의 기록 가능한 파라미터를 동시에 측정할 수 있습니다.
Read More
KT 220 다기능 데이터로거는 최대 3개의 파라미터를 동시에 기록합니다.농업, 산업 및 임상 실험실에서 다양한 매개변수를 모니터링하는 데 널리 사용됩니다.
Read More
KTT 220 써모커플 데이터로거는 간편한 무선 연결과 광범위한 온도 판독이 필요한 경우, 2개의 써모커플 연결로 핵심적인 역할을 수행합니다.농업, 산업 및 임상 실험실에서 다양한 매개변수를 모니터링하는 데 널리 사용됩니다.
Read More
KT 120 USB 데이터 로거는 온도 데이터를 모니터링하기에 최적의 솔루션으로, 내장 소프트웨어와 USB 연결을 통해 데이터를 쉽게 추출할 수 있습니다.Data Logger는 농업, 산업 및 임상 실험실에서 다양한 측정값을 모니터링하는 데 사용됩니다.
Read More
간단한 온도 기록이 필요한 경우에는 KT-50 Mini Data Logger를 확인 해주세요. Data Logger는 농업, 산업 및 임상 실험실에서 다양한 측정값을 모니터링하는 데 사용됩니다.
Read More
최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다

최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다

최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다 최대 2줄까지 노출됩니다